-
- fixed magnetic tachometer
- handheld centrifugal tachometer
- Fixed centrifugal tachometer
- Intelligent rotation speed digital display
- electric tachometer
- Non-contact handheld digital tachometer
- Standard rotation speed generating device
- rotation speed digital displayer
- frequency current converter
- intelligent speed digital indicator
-
-
Current Location:Home > Products > Pressure Meter > pressure gauge > stainless steel differential pressure gauge
Productsstainless steel differential pressure gauge
- Model:CYW
- Category:pressure gauge
- origin:SHANGHAI
stainless steel differential pressure gauge SHANGHAI AUTOMATION INSTRUMENTATION CO. LTD. NO. 11 AUTOMATION INSTRUMENTATION FACTORY Shanghai Yi Electric Actuator SHANGYI ELECTRIC ACTUATOR SHANGYI BRAND SHANGHAI ROTORK CONTROL ACTUATOR SHANGYI ELECTRICAL ACTUATOR
Stainless steel differential pressure gauge CYW-152B and CYW-153B stainless steel differential pressure gauge made by Shanghai Automation Instrumentation Co., Ltd. (hereinafter referred to as instrument) for chemical, chemical drilling, metallurgy, electricity, nuclear power and other industrial sectors in the process of measuring the various liquid (gas) Flow and other parameters. The instrument structure is made of stainless steel, the measurement system (double corrugated pipe emergency connection parts), pressure system (including joints, ducts, etc.) with a special structure design reasonable, advanced technology, with small size, light weight, good stability , Long life, the appearance of new, adaptable and so on.
Use instructions
The connection form of the instrument connection is parallel (can be directly connected with the three valve group) and oblique two, to adapt to different customers supporting the installation.
Structural principle
Instrument with double bellows structure, that is, two bellows were installed in the "workers" on both sides of the symmetrical position of the bracket. The upper and lower ends of the "working" font bracket are the movable end and the fixed end respectively, and the middle is connected by a spring piece; the two bellows are parallel and connected with the high and low pressure connection of the catheter on the case respectively; the gear transmission mechanism Directly mounted on the fixed end of the bracket and connected to the movable end of the bracket by means of a tie rod; the dial is fixed directly to the gear transmission mechanism.
The working principle of the instrument: Based on the sensing element using two corrugated pipes with the same stiffness, so in the same measured medium to force them to produce the same concentration of force and the activities of the support, because the spring on both sides of the moment under the action of torque Does not produce deflection, so the bracket is still in its original position, so that the gear transmission mechanism does not move, the pointer still refers to the zero.
When applying different pressures (generally higher than the low pressure side), the force of the two bellows acting on the movable support is not equal, so that the corresponding displacement is generated and the gear transmission is driven and amplified. Indicating the difference between the two.
NO. 11 AUTOMATION INSTRUMENTATION FACTORY
Shanghai Yi Electric Actuator
SHANGYI ELECTRIC ACTUATOR
SHANGYI BRAND
SHANGHAI ROTORK CONTROL ACTUATOR
SHANGYI ELECTRICAL ACTUATOR